Operation an
d
important ri
d
in
g
points
6-3
6
EAU16811
Tips for re
d
ucin
g
fuel con-
sumption
Fuel consumption depends largely on
your riding style. Consider the follow-
ing tips to reduce fuel consumption:
Shift up swiftly, and avoid high en-
gine speeds during acceleration.
Do not rev the engine while shift-
ing down, and avoid high engine
speeds with no load on the en-
gine.
Turn the engine off instead of let-
ting it idle for an extended length
of time (e.g., in traffic jams, at traf-
fic lights or at railroad crossings).
EAU16831
En
g
ine
b
reak-in
There is never a more important period
in the life of your engine than the period
between 0 and 1000 km (600 mi). For
this reason, you should read the fol-
lowing material carefully.
Since the engine is brand new, do not
put an excessive load on it for the first
1000 km (600 mi). The various parts in
the engine wear and polish themselves
to the correct operating clearances.
During this period, prolonged full-throt-
tle operation or any condition that
might result in engine overheating
must be avoided.
EAU37793
0–150 km (0–90 mi)
Avoid prolonged operation above 1/3
throttle.
After every hour of operation, stop the
engine, and then let it cool for five to
ten minutes.
Vary the engine speed from time to
time. Do not operate the engine at one
set throttle position.
150–500 km (90–300 mi)
Avoid prolonged operation above 1/2
throttle.
Rev the engine freely through the
gears, but do not use full throttle at any
time.
500–1000 km (300–600 mi)
Avoid prolonged operation above 3/4
throttle.
1000 km (600 mi) an
d
b
eyon
d
Avoid prolonged full-throttle operation.
Vary the engine speed occasionally.
NOTICE:
After 1000 km (600 mi) of
operation, the en
g
ine oil must
b
e
chan
g
e
d
, the oil filter cartri
dg
e or el-
ement replace
d
, an
d
the oil strainer
cleane
d
. If any en
g
ine trou
b
le
shoul
d
occur
d
urin
g
the en
g
ine
b
reak-in perio
d
, imme
d
iately have a
Yamaha
d
ealer check the vehicle.
[ECA10363]
UBW7E0E0.book Page 3 Tuesday, February 9, 2016 11:48 AM
