ENJOYING STEREO SOUND
62
En
You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control.
• When you play back Dolby Digital audio signals in the 2-channel or 5-channel stereo playback, the dynamic range becomes
compressed. If the volume level decreases to the extreme, use other beam modes except My Beam.
• When the 2-channel or 5-channel stereo playback is selected as the beam mode, the surround modes (see page 58) and the CINEMA
DSP programs (see page 65) become ineffective.
Sounds are output from the front right and left channels.
This is ideal for playing back hi-fi sources, such as CDs,
and can be used to replace your TV speakers.
1
Set the operation mode selector to YSP.
2
Press STEREO to select the 2-channel stereo
playback as the beam mode.
“STEREO” appears in the front panel display.
When you play back multi-channel sources, all signals except
those from the front left and right channels are mixed down and
output from the front left and right channels. No audio is output
from the center and surround channels.
Sounds are output from front left and right, center, and
surround left and right. This is ideal for playback in a large
listening area or at a party.
1
Set the operation mode selector to YSP.
2
Press STEREO twice to select the 5-channel
stereo playback as the beam mode.
“5CH STEREO” appears in the front panel display.
Enjoying stereo sound
Notes
2-channel stereo playback
STEREO
MY BEAM
MY SUR.
ENHANCER MENU
RETURN
DISPLAY
ENTER
SUR. DECODE
OFF
SPORTS
MUSIC
MOVIE
ENTRY
CAT/
A-E
4
6
3
2
1
+10
0
7
8
9
5
YSP
TV/AV
(U.S.A. and Canada models)
YSP
TV/AV
4
STEREO
S T E R E O
Note
5-channel stereo playback
YSP
TV/AV
4
STEREO
5 C H S T E R E O
