23
En
Optimizing the speaker setting for your listening room (YPAO)
English
INTR
ODUCTION
AD
DITIONAL
INFORMA
T
ION
APPENDIX
PRE
P
ARA
T
ION
BA
S
IC
OPERA
T
ION
AD
V
ANCED
OPERA
T
ION
If an error is detected during measurement, the
measurement is canceled and “Error” appears on the GUI
screen. Check the error and solve the problem. For details
on each error message, see page 70.
Press
j
Cursor
n
once, press
j
Cursor
l
/
h
to select “Retry” or “Exit” and then press
j
ENTER
.
Retry
Performs “Auto Setup” again.
Exit
Terminates the measurement and “Auto Setup”.
y
•
When “E-5:NOISY” appears, you can continue measurement. To
continue measurement, select “Proceed”. However, we recommend that
you solve the problem first and then perform measurement again.
If a problem occurs during measurement, “Check xx
warning(s)” appears on the GUI screen. Check the
warning and solve the problem. For details on each
warning message, see page 71.
y
•
Optimization will not be performed while a warning message is
displayed. We recommend that you solve the problem and perform “Auto
Setup” again.
1
Press
j
Cursor
n
/
k
to select “Check xx
warning(s)” and then press
j
ENTER
.
Details of the warning message are displayed. If there
are multiple warning messages, you can display the
next message using
j
Cursor
h
.
2
To return to the top result display, press
j
ENTER
again.
When an error message is displayed
during measurement
When a warning message is displayed
after measurement
Error
FrontL/R channel signals are not detected.
Check wiring and connections of the front L/R speakers.
Move focus
E-1 : No Front Speakers
Retry
Exit
3 /4 / 0.1
8.0ft / 8.5ft
-3.5dB / +4.5dB
Auto Setup
Speaker Config :
Distance (Min / Max) :
Level (Min / Max) :
Result
Set
Cancel
See details
Select items
Check 2 warnings
