Yamaha HTR-6072 Owner'S Manual Download Page 85

Page: 85 / 147

Setting the layout of the presence speakers

Selects a presence layout when presence speakers are used. This setting facilitates

the optimization of the sound field effect.

Setup menu

“Speaker” > “Configuration” > “Layout”

Settings

Front Height

Select this option when presence speakers are installed on the front wall.

Overhead

Select this option when presence speakers are installed to the ceiling.

Dolby Enabled SP

Select this option when using the Dolby Enabled speakers as the

presence speakers.

Note

▪ This setting is not available when “Presence” is set to “None”. For details on “Presence” in the “Setup”

menu, see the following:

– “Setting the use of presence speakers and their size” (p.84)

▪ For details on the layouts of the presence speakers, see the following:

– “Presence speaker layout” (p.130)

Setting the crossover frequency of the low-frequency

components

Sets the lower limit of the low-frequency components that can be output from a

speaker whose size is set to “Small”. A frequency sound lower than the specified value
will be produced from the subwoofer or front speakers.

Setup menu

“Speaker” > “Configuration” > “Crossover”

Settings

40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz

Note

If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.

Setting the phase of the subwoofer

Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch

the subwoofer phase.

Setup menu

“Speaker” > “Configuration” > “Subwoofer Phase”

Settings

Normal

Does not reverse the subwoofer phase.

Reverse

Reverses the subwoofer phase.

Note

This setting is not available when “Subwoofer” is set to “None”. For details on “Subwoofer” in the “Setup”

menu, see the following:

▪ “Setting the use of a subwoofer” (p.82)

Setting the use of Extra Bass

Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced
bass sounds, regardless of the size of the front speakers and the presence or

absence of the subwoofer.

Setup menu

“Speaker” > “Configuration” > “Extra Bass”

Settings

Off

Disables Extra Bass.

Enables Extra Bass.

Note

You can also use BASS on the remote control to enable/disable Extra Bass.

Summary of Contents for HTR-6072




















































































































































Search results

Summary of Contents for HTR-6072

Reviews:

Related manuals for HTR-6072

Brands by name

Popular brands

Yamaha HTR-6072, Owner'S Manual

Search results

Summary of Contents for HTR-6072

Reviews:

Related manuals for HTR-6072

Brands by name

Popular brands