background image

Option menu items

Use the following table to configure playback settings of the unit.

Note

▪ Available items vary depending on the selected input source.
▪ Text in parentheses denotes indicators on the front display.
▪ Depending on the region of purchase, some menu items for audio streaming services are also available.

Item

Function

Page

Input Select (Input Select)

Switches the input source.

p.69

Tone Control (Tone Control)

Adjusts the level of high-frequency range and low-

frequency range individually.

p.69

DSP/Surround

(DSP/
Surround)

Program (PRG)

Select the sound programs and stereo playback.

p.69

Sur.Decode 
(SrDec)

Select which surround decoder is used when

Sur.Decode is selected as the program.

p.70

DSP Level 

(DSP Level)

Adjusts the sound field effect level.

p.71

Adaptive DRC

(A.DRC)

Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted to the volume.

p.71

Enhancer
(Enhancer)

Enables/disables Compressed Music Enhancer.

p.72

Volume Trim
(Volume Trim)

Input Trim

(In.Trim)

Corrects volume differences between input sources.

p.72

Subwoofer Trim
(SW.Trim)

Fine-adjusts the subwoofer volume.

p.72

ZoneB Trim 
(ZB.Trim)

Corrects volume differences between Zone A/B.

p.72

Lipsync (Lipsync)

Enables/disables the “Lipsync” setting in the “Setup”
menu.

p.72

Signal Information (Signal Info.)

Displays information about the video/audio signals.

p.73

Audio In (Audio In)

Combines the video of the selected input source with
the audio of a different input source.

p.73

Video Out (Video Out)

Selects a video source to be output together with the
selected audio source.

p.74

FM Mode (FM Mode)

Switches between “Stereo” and “Monaural” for FM
radio reception.

p.74

 

Item

Function

Page

Preset (Preset)

Auto Preset

(AUTO)

Automatically registers FM radio stations with strong

signals as presets.

p.75

Clear Preset
(CLEAR)

Clear radio stations registered to preset numbers.

p.75

Traffic Program

(TrafficProgram)

(U.K., Europe, Russia and Middle East models only)
Automatically searches for a traffic information

station.

p.76

Shuffle (Shuffle)

Configures the shuffle setting.

p.76

Repeat (Repeat)

Configures the repeat setting.

p.77

Volume Interlock (Vol.Interlock)

Enables/disables volume control from iTunes/iPhone

via AirPlay.

p.77

Add to favorites (Add to Fav.)
Remove from favorites

(RemovefromFav.)

Adds your favorite Internet radio station to the

“Favorites” folder, or removes it from the “Favorites”

folder.

p.77

En

68

Summary of Contents for HTR-6072




















































































































































Reviews: