Yamaha HTR-6072 Owner'S Manual Download Page 105

Page: 105 / 147

Configuring the advanced settings (ADVANCED SETUP menu)

Basic operation of the ADVANCED SETUP menu

Perform the following basic procedure to operate the “ADVANCED SETUP” menu while
viewing the front display.

Set the unit to standby mode.

While holding down STRAIGHT on the front panel, press

(power).

(power)

STRAIGHT

PROGRAM

The top item and its setting of the “ADVANCED SETUP” menu appear on

the front display.

Press PROGRAM to select an item.

Press STRAIGHT to select a setting.

Press

(power) to set the unit to standby mode and turn it on

again.

This completes the settings.

Note

For details on the default settings, see the following:

▪ “Default settings of the ADVANCED SETUP menu” (p.146)

ADVANCED SETUP menu items

Use the following table to configure system settings of the unit.

Item

Function

Page

SP IMP.

(U.S.A. and Canada models only)
Changes the speaker impedance setting.

p.106

REMOTE ID

Selects the unit’s remote control ID.

p.106

(Asia, Taiwan, Brazil, General, and Central and South America

models only)
Changes the FM/AM tuning frequency setting.

p.106

TV FORMAT

Switches the video signal type of HDMI output.

p.106

4K MODE

Selects the HDMI 4K signal format.

p.107

DTS MODE

Selects the information to be sent to the BD player connected to
the unit about the DTS formats that the unit supports.

p.107

BKUP/RSTR

Backups and restores all the settings for the unit.

p.108

INIT

Restores the default settings.

p.109

UPDATE

Updates the firmware.

p.109

VERSION

Checks the version of firmware currently installed on the unit.

p.109

105

Summary of Contents for HTR-6072




















































































































































Search results

Summary of Contents for HTR-6072

Reviews:

Related manuals for HTR-6072

Brands by name

Popular brands

Yamaha HTR-6072, Owner'S Manual

Search results

Summary of Contents for HTR-6072

Reviews:

Related manuals for HTR-6072

Brands by name

Popular brands