Yamaha HTR-6065 Owner'S Manual Download Page 40

Page: 40 / 161

PREPARATIONS

➤

Optimizing the speaker settings automatically (YPAO)

Use the cursor keys to select “Save/Cancel” and
press ENTER.

To save the measurement results, use the cursor
keys (

) to select “SAVE” and press ENTER.

The adjusted speaker settings are applied.

• To finish the measurement without saving the result, select “CANCEL”.

Disconnect the YPAO microphone from the unit.

This completes optimization of the speaker settings.

Measuring at multiple listening positions
(multi measure) (HTR-7065 only)

When “Multi Position” is set to “Yes”, follow the procedure below for
measurement.

• Do not stand between the speakers and the YPAO microphone during the

measurement process. It takes about 10 minutes to measure 8 listening positions.

• Move to the corner of the room or leave the room.

• If any error message (such as E-1) or warning message (such as W-1) appears,

see “Error messages” (p.43) or “Warning messages” (p.44).

To start the measurement, use the cursor keys to
select “Measure” and press ENTER.

The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.

• To cancel the measurement temporarily, press RETURN.

The following screen appears on the TV when the
measurement at the first position finishes.

Move the YPAO microphone to the next listening
position and press ENTER.

Repeat step 2 until measurements at all listening positions
(up to 8) have been taken.

Caution

• The YPAO microphone is sensitive to heat, so should not be placed anywhere

where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).

TV VOL

TV CH

INPUT

MUTE

CODE SET

ENT

MEMORY

MOVIE

ENHANCER

TUNING

PRESET

BAND

DISPLAY

RETURN

ENTER

SCREEN

OPTION

TOP MENU

MUTE

PROGRAM

VOLUME

POP-UP/MENU

PURE DIRECT

STRAIGHT

INFO

SLEEP

MUSIC

NET

PARTY

HDMI OUT

TUNER

MAIN

ZONE 2

USB

MODE

SCENE

DVD

NET

RADIO

SOURCE

RECEIVER

HDMI

AUDIO

V-AUX

SUR. DECODE

TV VOL

TV CH

INPUT

MUTE

CODE SET

ENT

MEMORY

MOVIE

ENHANCER

TUNING

PRESET

BAND

DISPLAY

SCREEN

OPTION

TOP MENU

MUTE

PROGRAM

VOLUME

POP-UP/MENU

PURE DIRECT

STRAIGHT

INFO

SLEEP

MUSIC

NET

PARTY

HDMI OUT

TUNER

MAIN

ZONE 2

USB

MODE

SCENE

DVD

NET

RADIO

SOURCE

RECEIVER

HDMI

AUDIO

V-AUX

SUR. DECODE

ENTER

RETURN

1 2 3 4 5 6 7 8 9 10

Automatic speaker setup

Cursor keys

Summary of Contents for HTR-6065


































































































































































Search results

Summary of Contents for HTR-6065

Reviews:

Related manuals for HTR-6065

Brands by name

Popular brands

Yamaha HTR-6065, Owner'S Manual

Search results

Summary of Contents for HTR-6065

Reviews:

Related manuals for HTR-6065

Brands by name

Popular brands