Yamaha HTR-6065 Owner'S Manual Download Page 137 | Manualshive

Page: 137 / 161

background image

English

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets
FCC requirements. Modifications not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.

2 IMPORTANT:

When connecting this product to accessories and/or another product use only

high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void your FCC authorization to
use this product in the USA.

3 NOTE:

This product has been tested and found to comply with the requirements listed in

FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements
provides a reasonable level of assurance that your use of this product in a residential
environment will not result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not installed and used according to
the instructions found in the users manual, may cause interference harmful to the operation of
other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all
installations. If this product is found to be the source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the
following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC
line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300
ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you can not locate the appropriate retailer, please
contact Yamaha Corporation of America A/V Division, USA. 6660 Orangethorpe Ave., Buena
Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of
America or its subsidiaries.

COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party:

Address:

Telephone:

Type of Equipment:

Model Name:

Yamaha Corporation of America A/V Division

6660 Orangethorpe Avenue Buena Park, CA 90620

714-522-9011

AV Receiver

RX-A3020/RX-A2020/RX-A1020/RX-A820/RX-A720/
RX-V3073/RX-V2073/RX-V1073/RX-V773/RX-V673/RX-V573/RX-V473/
HTR-7065/HTR-6065/HTR-5065/HTR-4065

• This device complies with Part 15 of the FCC Rules.
• Operation is subject to the following conditions:

– This device may not cause harmful interference.
– This device must accept any interference received including interference that may cause

undesired operation.

See the Troubleshooting section at the end of the Owner’s Manual on the supplied CD-ROM if
interference to radio reception is suspected.

UC

«
...
135
136
137
138
139
...
»

Summary of Contents for HTR-6065


































































































































































Reviews:

No comments

Related manuals for HTR-6065

Brand: Yaesu Pages: 3

Brand: Aiwa Pages: 10

Brand: Tactic Pages: 2

AquaTronics MS250

Brand: ASA Electronics Pages: 5

Brand: Alpine Pages: 78

Brand: Navilock Pages: 12

Brand: Blaupunkt Pages: 150

VK3YNG Sniffer 4

Brand: Foxhunt Pages: 15

Brand: Intelix Pages: 8

STINGER STXJLSBA

Brand: AAMP Global Pages: 7

Brand: Epson Pages: 14

Brand: Cambridge Audio Pages: 14

Brand: Kramer Pages: 19

Brand: Forest Pages: 9

CQVD7001U - CAR A/V DVD NAV

Brand: Panasonic Pages: 74

Brand: Metra Electronics Pages: 6

Brand: Pioneer Pages: 5

Brand: Pioneer Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands