RX-V395/RDS HTR5130/RDS
RX-V395/RDS
HTR5130/RDS
■
SELF CHECK MODE
HOW TO START & CANCEL
Turn the POWER switch ON while pressing the
DVD/LD and PRESET STATION No. 8 keys simul-
taneously, and then the unit enters the SELF
CHECK MODE (SELF). FL displays “SELF 1” first.
(The INPUT is CD.)
If the sound field program key of the main unit is
pressed, the mode is set to the CHECK mode of
that number. It is possible to select the INPUT
even during the self check (except for SELF 8).
To cancel the SELF CHECK MODE, turn the
POWER switch OFF or press the PRESET STA-
TION No. 8 key. (The unit enters the normal
mode.)
This machine has a SELF CHECK MODE (SELF) for facilitating inspection and measurement.
CONTENTS OF SELF CHECK MODE
Menu
RAM THROUGH A
RAM THROUGH B
RAM THROUGH C
EFFECT OFF/DISCO/FL ALL ON
MANUAL TEST
DOLBY PRO LOGIC
MAKER PRESET
EXIT
Select Key
PRESET STATION No. 1
PRESET STATION No. 2
PRESET STATION No. 3
PRESET STATION No. 4
PRESET STATION No. 5
PRESET STATION No. 6
PRESET STATION No. 7
PRESET STATION No. 8
No.
1
2
3
4
5
6
7
8
DETAILS OF SELF CONTENT
SELF 1
RAM THROUGH A
●
MAIN L/R is output through the bypass.
●
CENTER is output with the steering OFF and by
(L+R)/2. (WIDE mode)
●
RL/RR passes through the PS-RAM and is output
through the DSP.
●
The electronic volume (for CENTER/REAR) is -10dB.
●
FL displays “SELF 1”
HOW TO USE SELF CHECK MODE
In order to confirm characteristics (specifications) listed
in the table below, use SELF NO. 1, 3 and 4. (For
specifications, refer to page 5.)
Items
• Output Level/Impedance
• Frequency Response
• Total Harmonic Distortion (Rec Out & MAIN)
• S/N
• Minimum RMS Output Power Per Channel (Center &
Rear)
• Total Harmonic Distortion (Rear)
• Minimum RMS Output Power Per Channel (MAIN)
• Input Sensitivity/Impedance
• Headphone Jack Rated Output/Impedance
• Channel Separation
• Tone Control Characteristics
No.
1
3
4
8
L
R
YSS203
DOLBY PRO LOGIC section
L
C (L+R)/2
R
C
RL
RR
RL
RR
Steering
OFF
DSP section
PS-RAM
