Yamaha HTR-4071 Owner'S Manual Download Page 111

Page: 111 / 125

Error indications on the front display

Refer to the table below when the error message is indicated on the front display.

Message

Cause

Remedy

Access denied

Access to the PC is denied.

Configure the sharing settings and select the unit as a device to which music contents are shared

(p.63).

Access error

The unit cannot access the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

There is a problem with the signal path from the network to the unit.

Make sure your router and modem are turned on.
Check the connection between the unit and your router (or hub) (p.27).

Check SP Wires

The speaker cables short circuit.

Twist the bare wires of the cables firmly and connect to the unit and speakers properly.

Internal Error

An internal error has occurred.

Contact the nearest authorized Yamaha dealer or service center.

No content

There are no playable files in the selected folder.

Select a folder that contains files supported by the unit.

No device

The unit cannot detect the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Not connected

The network cable is not connected.

Connect the network cable properly.

The wireless router (access point) is not found.

Make sure the wireless router (access point) is turned on.

Please wait

The unit is preparing for connecting to the network.

Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn
it on again.

RemID Mismatch

The remote control IDs of the unit and the remote control are not
identical.

Change the remote control ID of the unit or the remote control (p.98).

Unable to play

The unit cannot play back the songs stored on the iPhone for some
reason.

Check the song data. If it cannot be played on the iPhone itself, the song data or storage area may be
defective.

The unit cannot play back the songs stored on the PC for some
reason.

Ensure that the files are types that the unit is able to play back. For information about the formats
supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.63). If the unit

supports the file format, but still cannot play back any files, the network may be overloaded with heavy
traffic.

USB Overloaded

An overcurrent is flowing through the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Version error

Firmware update is failed.

Update the firmware again.

Update failed.

Firmware update is failed.

Press STRAIGHT and select a firmware updating method, then press INFO to update the firmware
again.

111

Summary of Contents for HTR-4071






























































































































Search results

Summary of Contents for HTR-4071

Reviews:

Related manuals for HTR-4071

Brands by name

Popular brands

Yamaha HTR-4071, Owner'S Manual

Search results

Summary of Contents for HTR-4071

Reviews:

Related manuals for HTR-4071

Brands by name

Popular brands