GX-700/GX-700VCD
GX-700/VCD
No. & DISPLAY
01 G , E , TEST
02 FL + CLEAR
03 FL FULL
04 APO - ON/OFF
05 RDS - OFF/ON
06 A , PS - ON/OFF
07 A , M , - RDS/ALL
08 CT > C - ON/OFF
09 L > CT - ON/OFF
10 PSR2 - ON/OFF
11 RTBL - ON/OFF
12 SEC - OFF/ON
13 Temp
14 PEAK - ON/OFF
15 AMPC - OFF/ON
16 CDCH - ON/OFF
17 REM CODE
18 L , EN - ON/OFF
19 ALL CH >
20 RDS E / F
21 SUR TEST
22 KEYC - OFF/ON
23 AM - IF
24 CANCEL
25 DEST
FUNCTION
Equalizer check mode
FL display full lighting,
RAM CLEAR
FL display full lighting
PURPOSE & OPERATION
Used to check EQ.
Pressing the STANDBY/ON button will set the Equalizer Test mode.
For the details, refer to page 16.
Used for lighting of all display segments and clearing of RAM. (Note that
the user memory will be cleared.)
At the first pressing of the STANDBY/ON button, all display segments light
up and at the second pressing, MEMORY and M-CLEAR light up for 2
seconds and RAM of CPU is initialized. (The product mode is restored.)
(Presetting of the tuner becomes the manufacturer preset state.)
Used to check lighting of all display segments.
At the first pressing of the STANDBY/ON button, all display segments light up and
at the second pressing, this mode is canceled. (The product mode is restored.)
Do not use No. 04 to 12 functions as they are not for servicing.
Used to cancel the test program.
(The product mode is restored when the STANDBY/ON button is pressed.)
Destination display mode
■
RECEIVER TEST MODE
When RECEIVER TEST MODE is set through SYSTEM TEST MODE, “01 G.E.TEST” appears on the FL display. (01
is the test program No.)
Test programs from 01 to 25 are incorporated in RECEIVER TEST MODE.
Operation Procedure (Selection/execution of Test Program)
1) Select the test program by pressing the
r
TAPE (up) or
e
TAPE (down) button.
2) Pressing the STANDBY/ON button will execute the selected test program.
3) Repeat selection/execution of the test program as necessary.
15
Do not use No. 14 to 23 functions as they are not for servicing.
Temperature Detection
& Fan Control
Used to check the fan.
Pressing the STANDBY/ON button sets the fan test mode.
(The detected temperature and the fan control level are displayed. For the
details, refer to page 16.)