9-25
9
TIP
After adjusting the brake lever free play, check the
rear brake shoes for wear.
EBU34014
Drive chain slack
The drive chain slack should be checked before
each ride and adjusted if necessary.
TIP
When checking and adjusting the drive chain
slack, there should be no weight on the ATV and
all tires must be touching the ground.
To check the drive chain slack
1. Place the ATV on a level surface.
2. Move the ATV back and forth to locate the
tightest portion of the drive chain, and then
measure the drive chain slack as shown.
3. If the drive chain slack is incorrect, adjust it as
follows.
To adjust the drive chain slack
1. Loosen the bolts and nuts.
1. Rear brake lever free play adjusting nut
1
(a)
(b)
Drive chain slack:
24.0–32.0 mm (0.94–1.26 in)
1. Drive chain slack
1
UB8W13E0.book Page 25 Tuesday, June 1, 2021 1:16 PM