Yamaha Grizzly 700 FI, Owner'S Manual

Page: 150 / 186

8-57
8
NOTICE
ECB00930
To charge a VRLA (Valve Regulated Lead Acid)
battery, a special (constant-voltage) battery
charger is required. Using a conventional bat-
tery charger will damage the battery. If you do
not have access to a constant-voltage battery
charger, have a Yamaha dealer charge your
battery.
To store the battery
● If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.
● If the battery will be stored for more than two
months, check it at least once a month and fully
charge it if necessary.
To install the battery
TIP
Be sure the battery is fully charged.
1. Place the battery in its compartment.
2. Connect the positive battery lead first, then
connect the negative battery lead by installing
their bolt.
3. Install the battery holding plate by installing
the nuts.
4. Install the front carrier by installing the bolts.
5. Install the panel.
NOTICE
ECB00940
Always keep the battery charged. Storing a dis-
charged battery can cause permanent battery
damage.
1. Positive battery lead (red)
2. Negative battery lead (black)
1
2
U43P10E0.book Page 57 Thursday, May 15, 2008 2:55 PM