Yamaha Grizzly 700 FI Owner'S Manual Download Page 114

Page: 114 / 186

8-21

2. Remove the spark plug as shown, with the

spark plug wrench included in the owner’s tool
kit.

To check the spark plug

1. Check that the porcelain insulator around the

center electrode of the spark plug is a medi-
um-to-light tan (the ideal color when the ATV
is ridden normally).

TIP

If the spark plug shows a distinctly different color,
the engine could be operating improperly. Do not
attempt to diagnose such problems yourself. In-
stead, have a Yamaha dealer check the ATV.

2. Check the spark plug for electrode erosion

and excessive carbon or other deposits, and
replace it if necessary.

To install the spark plug

1. Measure the spark plug gap with a wire thick-

ness gauge and, if necessary, adjust the gap
to specification.

1. Spark plug wrench

Specified spark plug:

NGK/LMAR6A-9

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

U43P10E0.book Page 21 Thursday, May 15, 2008 2:55 PM

Summary of Contents for Grizzly 700 FI



























































































































































































Search results

Summary of Contents for Grizzly 700 FI

Reviews:

Related manuals for Grizzly 700 FI

Brands by name

Popular brands

Yamaha Grizzly 700 FI, Owner'S Manual

Search results

Summary of Contents for Grizzly 700 FI

Reviews:

Related manuals for Grizzly 700 FI

Brands by name

Popular brands