Yamaha Grizzly 700 FI Owner'S Manual Download Page 54

Page: 54 / 186

6-3

EBU20430

Operating the drive select lever and
driving in reverse

NOTICE

ECB00170

Before shifting, stop the ATV, otherwise the
transmission may be damaged.

Shifting: Neutral to High-range and High-range
to Low-range

1. Bring the ATV to a complete stop.
2. Apply the brake pedal, and then shift by mov-

ing the drive select lever along the shift guide.

TIP

Make sure that the drive select lever is completely
shifted into position.

3. Release the brake pedal, and then open the

throttle lever gradually.

Shifting: Neutral to Reverse and Reverse to
Park

TIP

The drive select lever cannot be shifted into or from
reverse or park without applying the brake pedal.

1. Bring the ATV to a complete stop.

1. Drive select lever

2. L (Low-range)

3. H (High-range)
4. N (Neutral)

5. R (Reverse)

6. P (Park)

U43P10E0.book Page 3 Thursday, May 15, 2008 2:55 PM

Summary of Contents for Grizzly 700 FI



























































































































































































Search results

Summary of Contents for Grizzly 700 FI

Reviews:

Related manuals for Grizzly 700 FI

Brands by name

Popular brands

Yamaha Grizzly 700 FI, Owner'S Manual

Search results

Summary of Contents for Grizzly 700 FI

Reviews:

Related manuals for Grizzly 700 FI

Brands by name

Popular brands