Yamaha GRIZZLY 700 FI YFM7FGPW Owner'S Manual Download

Page: 150 / 166

8-65

EBU27690

Troubleshooting charts

Starting problems or poor engine performance

Check the fuel level in

the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the compression.

Supply fuel.

The engine does not start.

Check the compression.

Operate the electric starter.

2. Compression

There is compression.

There is no compression.

Check the ignition.

Have a Yamaha dealer

check the ATV.

Remove the spark plug

and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the

spark plug gap, or replace the spark plug.

Have a Yamaha dealer check the ATV.

The engine does not start.

Have a Yamaha dealer

check the ATV.

The engine does not start.

Check the battery.

Operate the electric starter.

4. Battery

The engine turns over

quickly.

The engine turns over

slowly.

The battery is good.

Check the battery lead connections,

and charge the battery if necessary.

Dry

Wet

Operate the electric starter.

U3B460E0.book Page 65 Friday, May 12, 2006 2:51 PM

Summary of Contents for GRIZZLY 700 FI YFM7FGPW







































































































































































Search results

Summary of Contents for GRIZZLY 700 FI YFM7FGPW

Reviews:

Related manuals for GRIZZLY 700 FI YFM7FGPW

Brands by name

Popular brands

Yamaha GRIZZLY 700 FI YFM7FGPW, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 700 FI YFM7FGPW

Reviews:

Related manuals for GRIZZLY 700 FI YFM7FGPW

Brands by name

Popular brands