manualshive.com logo in svg

Yamaha GRIZZLY 700 FI YFM7FGPW, Owner'S Manual

Share
Download
Yamaha GRIZZLY 700 FI YFM7FGPW Owner'S Manual Download Page 66

7-5

7

WARNING

EWB01410

Never operate this ATV without wearing an ap-
proved motorcycle helmet, eye protection and
protective clothing. Operating without an ap-
proved motorcycle helmet increases your
chances of a severe head injury or death in the
event of an accident. Operating without eye
protection can result in an accident and in-
creases your chances of a severe injury in the
event of an accident. Operating without protec-
tive clothing increases your chances of severe
injury in the event of an accident.

Do not operate after consuming alcohol or
drugs.

The operator’s performance capability is reduced
by the influence of alcohol or drugs.

WARNING

EWB01420

Never consume alcohol or drugs before or
while driving this ATV.

Pre-operation checks

Always perform the pre-operation checks listed on
page 5-1 before riding for proper care of the ATV
and to ensure safety.

WARNING

EWB01430

Always inspect your ATV each time you use it
to make sure the ATV is in safe operating con-
dition. Always follow the inspection and main-
tenance procedures and schedules described

U3B460E0.book  Page 5  Friday, May 12, 2006  2:51 PM

Summary of Contents for GRIZZLY 700 FI YFM7FGPW







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands