Yamaha Grizzly 700 2011 Manual Download

Page: 61 / 172

6-3

3. Release the brake pedal, and then open the

throttle lever gradually.

Shifting: Neutral to Reverse and Reverse to
Park

WARNING

EWB00720

Improper operation in reverse could make you
hit an obstacle or even a person behind you,
resulting in serious injury. When you shift into

reverse, make sure there are no people or ob-
stacles behind you. When it is safe to proceed,
go slowly.

1. Bring the ATV to a complete stop.
2. Apply the brake pedal. The drive select lever

cannot be shifted into or from reverse or park
without applying the brake pedal.

3. Shift from neutral to reverse or from reverse to

park and vice versa by moving the drive select
lever along the shift guide.

1. Drive select lever

2. L (Low-range)

3. H (High-range)
4. N (Neutral)

5. R (Reverse)

6. P (Park)

U1HP60E0.book Page 3 Monday, April 11, 2011 7:56 PM

Summary of Contents for Grizzly 700 2011













































































































































































Search results

Summary of Contents for Grizzly 700 2011

Reviews:

Related manuals for Grizzly 700 2011

Brands by name

Popular brands

Yamaha Grizzly 700 2011, Manual

Search results

Summary of Contents for Grizzly 700 2011

Reviews:

Related manuals for Grizzly 700 2011

Brands by name

Popular brands