Yamaha Grizzly 700 2011, Manual

Page: 30 / 172

4-3
4
EBU30530
Coolant temperature warning light “ ”
This warning light comes on when the engine over-
heats. When this occurs during operation, stop the
engine as soon as it is safe to do so and allow it to
cool down for about 10 minutes.
The electrical circuit of the warning light can be
checked by turning the key to “
” (on). The warn-
ing light should come on for a few seconds, and
then go off.
If the warning light does not come on initially when
the key is turned to “
” (on), or if the warning light
remains on, have a Yamaha dealer check the elec-
trical circuit.
NOTICE
ECB00891
● The engine may overheat if the ATV is over-
loaded. In this case, reduce the load to spec-
ification.
● The engine may also overheat if mud or dirt
has accumulated on the radiator (i.e., after
riding in wet terrain). In this case, see page
8-20 for an explanation on how to access the
radiator.
● Start the engine after making sure that the
warning light is out. Continuous use while
the warning light is on may cause damage to
the engine.
EBU30480
Engine trouble warning light “ ”
This warning light comes on or flashes when an
electrical circuit monitoring the engine is not work-
ing correctly. When this occurs, have a Yamaha
dealer check the self-diagnosis system. (See page
4-7 for an explanation of the self-diagnosis device.)
The electrical circuit of the warning light can be
checked by turning the key to “
” (on). The warn-
ing light should come on for a few seconds, and
then go off.
If the warning light does not come on initially when
the key is turned to “
” (on), or if the warning light
remains on, have a Yamaha dealer check the elec-
trical circuit.
EBU30510
Electric Power Steering warning light “EPS”
This warning light comes on when the key is turned
to “
” (on), and then goes off once the engine is
started. If the warning light remains on or comes on
U1HP60E0.book Page 3 Monday, April 11, 2011 7:56 PM