Yamaha Grizzly 700 2011 Page 109 Manual Download | Manualshive

Page: 109 / 172

background image

8-20

8

EBU28671

Removing the radiator grills

The radiator grills can be removed to access the
radiator for cleaning.

To remove a radiator grill

Remove the quick fastener, pull the radiator grill
outward at the top, and then pull it upward.

To install a radiator grill

Place the radiator grill in its original position, and
then install the quick fastener.

EBU23213

Checking the spark plug

The spark plug is an important engine component,
which is easy to check. Since heat and deposits
will cause any spark plug to slowly erode, the spark
plug should be removed and checked in accor-
dance with the periodic maintenance and lubrica-
tion chart. In addition, the condition of the spark
plug can reveal the condition of the engine.

To remove the spark plug

1. Remove the spark plug cap.

1. Radiator grill

2. Quick fastener

2

1

1. Spark plug cap

1

U1HP60E0.book Page 20 Monday, April 11, 2011 7:56 PM

«
...
107
108
109
110
111
...
»

Summary of Contents for Grizzly 700 2011













































































































































































Reviews:

No comments

Related manuals for Grizzly 700 2011

Brand: E-Z-GO Pages: 158

Brand: Wacker Neuson Pages: 138

Brand: BERG Pages: 12

DOC ECO 30NXMOPRPB001

Brand: Nilox Pages: 84

Brand: Arctic Cat Pages: 72

WILD HP 300 - SERVICE

Brand: GAS GAS Pages: 65

Brand: LAMAX Pages: 150

Brand: Yamaha Pages: 134

Brand: Yamaha Pages: 206

Brand: Suzuki Pages: 140

Brand: PRONAR Pages: 136

Sportsman 800 Big Boss

Brand: Polaris Pages: 143

Brand: Taylor-Dunn Pages: 200

Brand: Yamaha Pages: 175

Brand: Ace Pages: 10

Brand: E-TON Pages: 225

EcoLight MPG585

Brand: Malone Pages: 9

Brand: SeaCom Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands