Yamaha Grizzly 700 2011, Manual

Page: 103 / 172

8-14
8
4. Install panel A.
Panel C
To remove the panel
1. Remove the seat. (See page 4-18.)
2. Remove the quick fastener screws, and then
pull the panel upward to remove it.
To install the panel
1. Place the panel in the original position, and
then install the quick fastener screws.
2. Install the seat.
Panels D and E
To remove a panel
1. Remove panels A and C.
2. Remove the quick fastener screw and bolt,
and then pull the panel upward to remove it.
TIP
To ease removal of panel D, shift the drive select
lever into the reverse position.
Tightening torques:
Carrier bolt (top):
34 Nm (3.4 m·kgf, 25 ft·lbf)
Carrier bolt (under the fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
1. Panel C
2. Quick fastener screw
U1HP60E0.book Page 14 Monday, April 11, 2011 7:56 PM