Yamaha GRIZZLY 350 YFM35FGW Owner'S Manual Download Page 88 | Manualshive

Page: 88 / 138

Yamaha GRIZZLY 350 YFM35FGW Owner'S Manual Download Page 88

8-9

8

plug should be removed and checked in accor-
dance with the periodic maintenance and lubrica-
tion chart. In addition, the condition of the spark
plug can reveal the condition of the engine.

To remove the spark plug

1. Remove the spark plug cap.

2. Remove the spark plug as shown, with the

spark plug wrench included in the owner’s tool
kit.

To check the spark plug

1. Check that the porcelain insulator around the

center electrode of the spark plug is a medi-
um-to-light tan (the ideal color when the ATV
is ridden normally).

NOTE:

If the spark plug shows a distinctly different color,
the engine could be operating improperly. Do not
attempt to diagnose such problems yourself. In-
stead, have a Yamaha dealer check the ATV.

2. Check the spark plug for electrode erosion

and excessive carbon or other deposits, and
replace it if necessary.

1. Spark plug cap

1. Spark plug wrench

U5UH63E0.book Page 9 Wednesday, April 26, 2006 9:21 AM

«
...
86
87
88
89
90
...
»

Summary of Contents for GRIZZLY 350 YFM35FGW











































































































































Reviews:

No comments