manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35FGW, Owner'S Manual, Page: 77 / 138

Share
Download
Yamaha GRIZZLY 350 YFM35FGW Owner'S Manual Download Page 77

7-22

7

RIDING OVER ROUGH TERRAIN

Riding over rough terrain should be done with cau-
tion. Look out for obstacles which could cause
damage to the ATV or could lead to an upset or ac-
cident. Be sure to keep your feet firmly mounted on
the footboards at all times. Avoid jumping the ATV
as loss of control and damage to the ATV may re-
sult.

WARNING

EWB01650

Before operating in a new area, check for ob-
stacles. Never attempt to ride over large obsta-
cles, such as large rocks or fallen trees. When
you go over obstacles, always follow proper
procedures as described in the Owner’s Manu-
al.

SLIDING AND SKIDDING

Care should be used when riding on loose or slip-
pery surfaces since the ATV may slide. If unex-
pected and uncorrected, sliding could lead to an
accident.
To reduce the tendency for the front wheels to slide
in loose or slippery conditions, positioning your
weight over the front wheels will sometimes help.

1. Storage compartment check hose

1. V-belt case drain plug

U5UH63E0.book  Page 22  Wednesday, April 26, 2006  9:21 AM

Summary of Contents for GRIZZLY 350 YFM35FGW











































































































































Reviews:

No comments