Yamaha GRIZZLY 350 YFM35FGW Owner'S Manual Download Page 63 | Manualshive

Page: 63 / 138

Yamaha GRIZZLY 350 YFM35FGW Owner'S Manual Download Page 63

7-8

7

WARNING

EWB01470

Always keep both hands on the handlebars
and both feet on the footboards of your ATV
during operation. Removing even one hand or
foot can reduce your ability to control the ATV
or could cause you to lose your balance and
fall off of the ATV. If you remove a foot from a
footboard, your foot or leg may come into con-
tact with the rear wheels, which could injure
you or cause an accident.

Avoid wheelies and jumping. You may lose control
of the ATV or overturn.

WARNING

EWB01480

Never attempt stunts, such as wheelies or
jumps. Don’t try to show off.

Modifications

WARNING

EWB01490

Never modify this ATV through improper in-
stallation or use of accessories. All parts and
accessories added to this ATV should be gen-
uine Yamaha or equivalent components de-
signed for use on this ATV and should be

U5UH63E0.book Page 8 Wednesday, April 26, 2006 9:21 AM

«
...
61
62
63
64
65
...
»

Summary of Contents for GRIZZLY 350 YFM35FGW











































































































































Reviews:

No comments