manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35FGW, Owner'S Manual, Page: 119 / 138

Share
Download
Yamaha GRIZZLY 350 YFM35FGW Owner'S Manual Download Page 119

8-40

8

3. Remove the headlight bulb holder assembly

by turning it counterclockwise.

NOTE:

The headlight bulb cannot be removed from the
headlight bulb holder. To replace the headlight
bulb, replace the headlight bulb holder assembly.

WARNING

EWB02220

A headlight bulb is hot when it is on and imme-
diately after it is turned off. Wait for the bulb to
cool before touching or removing it. You can
be burned or a fire could start if the bulb touch-
es something flammable.

4. Install a new headlight bulb holder assembly

by inserting it into the headlight unit and turn-
ing it clockwise.

CAUTION:

ECB00650

Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of the
bulb, and the bulb life will be adversely affect-
ed. Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth
moistened with alcohol or thinner.

5. Connect the headlight coupler.

1. Headlight bulb holder assembly

1. Do not touch the glass part of the bulb.

U5UH63E0.book  Page 40  Wednesday, April 26, 2006  9:21 AM

Summary of Contents for GRIZZLY 350 YFM35FGW











































































































































Reviews:

No comments