Yamaha GRIZZLY 350 YFM35FGD Owner'S Manual Download

Page: 128 / 144

8-45

7. Install the bulb holder cover and the cover at

the rear of the headlight.

NOTICE:

Make sure

the headlight bulb holder cover is securely
fitted over the bulb holder and seated
properly.

[ECB00671]

8. Adjust the headlight beam if necessary.

EBU25551

Adjusting a headlight beam

NOTICE

ECB00690

It is advisable to have a Yamaha dealer make
this adjustment.

To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).

EBU25580

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, have a
Yamaha dealer replace it.

EBU25651

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.

1. Headlight beam adjusting screw

U1NS61E0.book Page 45 Tuesday, May 15, 2012 5:19 PM

Summary of Contents for GRIZZLY 350 YFM35FGD

















































































































































Search results

Summary of Contents for GRIZZLY 350 YFM35FGD

Reviews:

Related manuals for GRIZZLY 350 YFM35FGD

Brands by name

Popular brands

Yamaha GRIZZLY 350 YFM35FGD, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 350 YFM35FGD

Reviews:

Related manuals for GRIZZLY 350 YFM35FGD

Brands by name

Popular brands