Yamaha GRIZZLY 350 YFM350DF Owner'S Manual Download | Manualshive

Page: 39 / 146

background image

4-12

4

3. Wipe up any spilled fuel immediately.

NOTICE:

Immediately wipe off spilled fuel

with a clean, dry, soft cloth, since fuel may
deteriorate painted surfaces or plastic
parts.

[ECB00982]

4. Turn the fuel tank cap fully clockwise to make

sure it is securely closed.

WARNING

EWB02532

Gasoline is poisonous and can cause injury or
death. Handle gasoline with care. Never siphon
gasoline by mouth. If you should swallow some
gasoline or inhale a lot of gasoline vapor, or get
some gasoline in your eyes, see your doctor

immediately. If gasoline spills on your skin,
wash with soap and water. If gasoline spills on
your clothing, change your clothes.

NOTICE

ECB00071

Use only unleaded gasoline. The use of leaded
gasoline will cause severe damage to internal
engine parts, such as the valves and piston
rings, as well as to the exhaust system.

Your Yamaha engine has been designed to use
regular unleaded gasoline with a research octane
number of 91 or higher (95 or higher for Europe). If
knocking (or pinging) occurs, use a gasoline of a
different brand. Use of unleaded fuel will extend
spark plug life and reduce maintenance costs.

EBU18821

Fuel cock

The fuel cock supplies fuel from the tank to the
carburetor while also filtering it.
The fuel cock lever positions are explained as fol-
lows and shown in the illustrations.

Recommended fuel:

Regular unleaded gasoline only
For Europe: Regular unleaded gasoline only
with a research octane number of 95 or
higher

Fuel tank capacity:

13.5 L (3.57 US gal, 2.97 Imp.gal)

Fuel reserve amount:

3.3 L (0.87 US gal, 0.73 Imp.gal)

U1NS63E0.book Page 12 Monday, March 10, 2014 9:05 AM

«
...
37
38
39
40
41
...
»

Summary of Contents for GRIZZLY 350 YFM350DF



















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350DF

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands