manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350DF, Owner'S Manual

The Yamaha GRIZZLY 350 YFM350DF is a versatile and powerful all-terrain vehicle (ATV). To unleash its full potential, make sure you have the Owner's Manual. Download this essential manual for free from manualshive.com and easily access important information on maintenance, operation, and safety to ensure an unforgettable outdoor experience.

Share
Download
background image

8-40

8

KEEP OUT OF REACH OF CHILDREN.

 

NOTICE

ECB00621

Never attempt to remove the battery cell seals,
as this would permanently damage the battery.

 

To remove the battery

1. Remove the seat. (See page 4-14.)
2. Remove the battery holding plate by remov-

ing the bolts.

3. Disconnect the negative battery lead first,

then the positive battery lead by removing
their bolt. 

NOTICE:

 When removing the bat-

tery, the main switch must be off, and the
negative lead must be disconnected be-
fore the positive lead.

 [ECB01002]

4. Pull the battery out of its compartment.

To charge the battery

Have a Yamaha dealer charge the battery as soon
as possible if it seems to have discharged. Keep
in mind that the battery tends to discharge more
quickly if the ATV is equipped with optional elec-
trical accessories.

1. Bolt
2. Battery holding plate
3. Negative battery lead (black)
4. Positive battery lead (red)

1

2

3

4

U1NS63E0.book  Page 40  Monday, March 10, 2014  9:05 AM

Summary of Contents for GRIZZLY 350 YFM350DF



















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350DF

Brands by name

Popular brands

Load more brands