Yamaha GRIZZLY 350 YFM350DF Owner'S Manual Download

Page: 114 / 146

8-31

EBU30691

Adjusting the brake pedal height, and
the brake pedal and rear brake lever
free play

The brake pedal height, brake pedal free play, and
rear brake lever free play must be checked and, if
necessary, adjusted at the intervals specified in
the periodic maintenance and lubrication chart.

TIP



Always perform this maintenance completely in
the following order whenever adjusting the rear
brake.



Before adjusting the brake pedal and brake le-
ver free play, check the rear brake shoes for
wear.

Checking and adjusting the brake pedal height

The top of the brake pedal should be positioned
72.0–82.0 mm (2.83–3.23 in) above the footboard
bracket.

Check and adjust the brake pedal height as fol-
lows.

1. Remove the footboard by removing the bolts

and nuts.

1. No brake lever free play

1. Distance between brake pedal and footboard bracket

U1NS63E0.book Page 31 Monday, March 10, 2014 9:05 AM

Summary of Contents for GRIZZLY 350 YFM350DF



















































































































































Search results

Summary of Contents for GRIZZLY 350 YFM350DF

Reviews:

Related manuals for GRIZZLY 350 YFM350DF

Brands by name

Popular brands

Yamaha GRIZZLY 350 YFM350DF, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 350 YFM350DF

Reviews:

Related manuals for GRIZZLY 350 YFM350DF

Brands by name

Popular brands