manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350DE, Owner'S Manual

The Yamaha GRIZZLY 350 YFM350DE is a powerful and versatile ATV designed for off-road adventures. This reliable machine is accompanied by the essential Owner's Manual, providing detailed instructions and maintenance guidance. Discover and download the free manual from our website to maximize your enjoyment and safety while using this incredible vehicle.

Share
Download
background image

8-48

8

EBU25753

Troubleshooting chart 

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the battery.

Supply fuel.

The engine does not start. 
Check the battery.

The engine does not start.
Check the ignition.

Operate the electric starter.

4. Compression

There is compression.

There is no compression.

The engine does not start. Have a Yamaha dealer check the ATV.

Have a Yamaha dealer check the ATV.

Remove the spark plug
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug.

Have a Yamaha dealer check the ATV.

The engine does not start.
Check the compression.

Operate the electric starter.

2. Battery

The engine turns over  
quickly.

The engine turns over  
slowly.

The battery is good.

Check the battery lead connections,
and have a Yamaha dealer charge 
the battery if necessary.

Dry

Wet

Open the throttle halfway and operate
the electric starter.

U1NS62E0.book  Page 48  Monday, April 8, 2013  4:59 PM

Summary of Contents for GRIZZLY 350 YFM350DE

















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350DE

Brands by name

Popular brands

Load more brands