manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350DE, Owner'S Manual

The Yamaha GRIZZLY 350 YFM350DE is a powerful and versatile ATV designed for off-road adventures. This reliable machine is accompanied by the essential Owner's Manual, providing detailed instructions and maintenance guidance. Discover and download the free manual from our website to maximize your enjoyment and safety while using this incredible vehicle.

Share
Download
background image

8-31

8

●

Before adjusting the brake pedal and brake lever
free play, check the rear brake shoes for wear.

Checking and adjusting the brake pedal height

The top of the brake pedal should be positioned
72.0–82.0 mm (2.83–3.23 in) above the footboard
bracket.

Check and adjust the brake pedal height as fol-
lows.

1. Remove the footboard by removing the bolts

and nuts.

2. Check the brake pedal height.

If the brake pedal height is correct, skip steps
3–5.

3. Loosen the locknut.

1. Distance between brake pedal and footboard bracket

1

1. Footboard

2. Bolt and nut

3. Bolt

2

2

3

1

U1NS62E0.book  Page 31  Monday, April 8, 2013  4:59 PM

Summary of Contents for GRIZZLY 350 YFM350DE

















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350DE

Brands by name

Popular brands

Load more brands