manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350DE, Owner'S Manual

The Yamaha GRIZZLY 350 YFM350DE is a powerful and versatile ATV designed for off-road adventures. This reliable machine is accompanied by the essential Owner's Manual, providing detailed instructions and maintenance guidance. Discover and download the free manual from our website to maximize your enjoyment and safety while using this incredible vehicle.

Share
Download
background image

8-23

8

2. Remove the tailpipe by pulling it out of the

muffler.

3. Tap the tailpipe lightly, and then use a wire

brush to remove any carbon deposits from the
spark arrester portion of the tailpipe and inside
of the tailpipe housing.

4. Insert the tailpipe into the muffler and align the

bolt holes.

5. Install the tailpipe bolts and tighten them to the

specified torque.

1. Tailpipe bolt
2. Tailpipe

1. Tailpipe
2. Spark arrester

Tightening torque:

Tailpipe bolt:

10 Nm (1.0 m·kgf, 7.2 ft·lbf)

U1NS62E0.book  Page 23  Monday, April 8, 2013  4:59 PM

Summary of Contents for GRIZZLY 350 YFM350DE

















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350DE

Brands by name

Popular brands

Load more brands