manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350DE, Owner'S Manual

The Yamaha GRIZZLY 350 YFM350DE is a powerful and versatile ATV designed for off-road adventures. This reliable machine is accompanied by the essential Owner's Manual, providing detailed instructions and maintenance guidance. Discover and download the free manual from our website to maximize your enjoyment and safety while using this incredible vehicle.

Share
Download
background image

8-45

8

7. Install the bulb holder cover and the cover at

the rear of the headlight. 

NOTICE:

 Make sure

the headlight bulb holder cover is securely
fitted over the bulb holder and seated
properly.

 [ECB00671]

8. Adjust the headlight beam if necessary.

EBU25551

Adjusting a headlight beam 

NOTICE

ECB00690

It is advisable to have a Yamaha dealer make
this adjustment.

To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).

EBU25580

Replacing the tail/brake light bulb 

If the tail/brake light bulb burns out, have a
Yamaha dealer replace it.

EBU25651

Removing a wheel 

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.

1. Headlight beam adjusting screw

U1NS62E0.book  Page 45  Monday, April 8, 2013  4:59 PM

Summary of Contents for GRIZZLY 350 YFM350DE

















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350DE

Brands by name

Popular brands

Load more brands