Yamaha FJR13AEV(C) Owner'S Manual Download Page 31 | Manualshive

Page: 31 / 112

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-13

3

EAU40481

Hand shift lever “ ”/“ ”

The hand shift lever must be enabled
by pressing the hand shift control
switch prior to shifting gears.
Pull the “ ” side of the lever with your
index finger to shift up, and push the
“ ” side of the lever with your thumb to
shift down.

EAU26822

Brake lever

The brake lever is located at the right
handlebar grip. To apply the front
brake, pull the lever toward the handle-
bar grip.

The brake lever is equipped with a po-
sition adjusting dial. To adjust the dis-
tance between the brake lever and the
handlebar grip, turn the adjusting dial
while holding the lever pushed away
from the handlebar grip. Make sure that
the appropriate setting on the adjusting
dial is aligned with the “

” mark on the

brake lever.

EAU39540

Brake pedal

The brake pedal is on the right side of
the vehicle.
This model is equipped with a unified
brake system.
When pressing down on the brake ped-
al, the rear brake and a portion of the
front brake are applied. For full braking
performance, apply both the brake le-
ver and the brake pedal simultaneous-
ly.

1. Hand shift lever “

”

2. Hand shift lever “

”

3. Hand shift control switch

1. Brake lever

2. “

” mark

3. Brake lever position adjusting dial
4. Distance between brake lever and handlebar

grip

1. Brake pedal

U2D21AE0.book Page 13 Monday, June 26, 2006 2:18 PM

«
...
29
30
31
32
33
...
»

Summary of Contents for FJR13AEV(C)

















































































































Reviews:

No comments

Related manuals for FJR13AEV(C)

Brand: Danelec Pages: 67

Brand: EASTERN INSTRUMENTS Pages: 93

Brand: EarthQuake Pages: 12

Brand: Pari Pages: 2

Brand: Eaton Pages: 21

Brand: NANO Pages: 4

Brand: Olsen Pages: 4

Dominator Series

Brand: Falcon Pages: 31

Brand: Fakir Pages: 22

Brand: ParaBody Pages: 3

Brand: Hach Pages: 52

Brand: hager Pages: 2

Brand: Marcy Pages: 9

Brand: Parker Pages: 24

Brand: Yacht Devices Pages: 32

Spielturm Premium L GP1122

Brand: gartenpirat Pages: 8

Lisa-Fun GP1604

Brand: gartenpirat Pages: 6

Fresh DFG58D1BSS

Brand: Danby Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands