Yamaha FJR13AEV(C) Owner'S Manual Download Page 77 | Manualshive

Page: 77 / 112

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-22

6

EAU36500

Adjusting the rear brake light
switch

The rear brake light switch, which is ac-
tivated by the brake pedal, is properly
adjusted when the brake light comes
on just before braking takes effect. If
necessary, have a Yamaha dealer ad-
just the brake light switch.

EAU22390

Checking the front and rear
brake pads

The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.

EAU22420

Front brake pads

Each front brake pad is provided with a
wear indicator groove, which allows
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator groove. If a brake
pad has worn to the point that the wear

indicator groove has almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.

EAU22500

Rear brake pads

Check each rear brake pad for damage
and measure the lining thickness. If a
brake pad is damaged or if the lining
thickness is less than 0.8 mm (0.03 in),
have a Yamaha dealer replace the
brake pads as a set.

1. Brake pad wear indicator groove

1. Lining thickness

U2D21AE0.book Page 22 Monday, June 26, 2006 2:18 PM

«
...
75
76
77
78
79
...
»

Summary of Contents for FJR13AEV(C)

















































































































Reviews:

No comments

Related manuals for FJR13AEV(C)

Brand: ZOLL Pages: 84

Brand: Kaivac Pages: 29

Brand: MacDon Pages: 65

Brand: Yardistry Pages: 9

Brand: Hagie Pages: 141

Brand: Kamikaze Pages: 112

Brand: KAM Pages: 2

Brand: Landoll Pages: 70

Brand: Landice Pages: 19

Brand: Landice Pages: 7

9NP-B7524 Series

Brand: Nautilus Pages: 2

Be strong NS 700X

Brand: Nautilus Pages: 34

Brand: Nautilus Pages: 21

Brand: olympia electronics Pages: 4

MiniLift160 Classic

Brand: Handicare Pages: 28

Brand: Hands Free Farm Pages: 24

Brand: i-Optik Pages: 75

Brand: Össur Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands