Yamaha FJR13AEV(C), Owner'S Manual

Page: 21 / 112

INSTRUMENT AND CONTROL FUNCTIONS
3-3
3
EAU11060
Neutral indicator light “ ”
This indicator light comes on when the
transmission is in the neutral position.
EAU11080
High beam indicator light “ ”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11120
Oil level warning light “ ”
This warning light comes on when the
engine oil level is low.
The electrical circuit of the warning light
can be checked by turning the key to
“ON”.
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.
NOTE:
Even if the oil level is sufficient, the
warning light may flicker when riding on
a slope or during sudden acceleration
or deceleration, but this is not a mal-
function.
EAU40512
Engine trouble “ ”/YCC-S
“ ” indicators and warning
light
Engine trouble indicator “ ” and
warning light
This indicator is displayed and the
warning light comes on or flashes when
an electrical circuit monitoring the en-
gine is defective. When this occurs,
have a Yamaha dealer check the self-
diagnosis system. (See page 3-5 for an
explanation of the self-diagnosis de-
vice.)
YCC-S indicator “ ” and warning
light
This indicator is displayed and the
warning light comes on if there is a mal-
function in the YCC-S. If this occurs:
●
YCC-S is disabled, so it will be im-
possible to shift out of the gear you
are in
●
the clutch may stay engaged, so a
shuddering sensation may be felt
as you come to a stop
Stop the vehicle when it is safe to do so,
and park it away from traffic. Have a
Yamaha dealer check the YCC-S.
1. Engine trouble indicator “ ” and warning
light
SHIFT
1. YCC-S indicator “ ” and warning light
SHIFT
SHIFT
U2D21AE0.book Page 3 Monday, June 26, 2006 2:18 PM