Yamaha FAZER FZS1000 Owner'S Manual Download | Manualshive

Page: 56 / 94

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-15

6

out with compressed air as shown.
If the air filter element is damaged,
replace it.

9. Insert the air filter element into the

air filter case.

CAUTION:

ECA11330

The engine should never be operat-
ed without the air filter element in-
stalled, otherwise the piston(s)
and/or cylinder(s) may become ex-
cessively worn.

10. Install the air filter case cover by in-

stalling the screws.

11. Place the rubber cover in the origi-

nal position.

12. Install the panels.

13. Install the fuel tank by installing the

bolts.

WARNING

EWA11290

●

Before installing the fuel tank,
make sure that the fuel hoses
are not damaged. If any fuel
hose is damaged, do not start
the engine but have a Yamaha
dealer replace the hose, other-
wise fuel may leak.

●

Make sure that the fuel hoses
are properly connected and
routed, and not pinched.

●

Be sure to place the fuel tank
breather hose in the original po-
sition.

14. Install the seat.

1. Air filter element

1. Fuel tank breather hose
2. Original position (white mark)

U1C2E1E0.book Page 15 Wednesday, August 4, 2004 11:57 AM

«
...
54
55
56
57
58
...
»

Summary of Contents for FAZER FZS1000































































































Reviews:

No comments

Related manuals for FAZER FZS1000

Brand: probrake Pages: 2

Brand: Ohlins Pages: 8

Brand: Memphis Shades Pages: 2

Brand: Sachs Bikes Pages: 71

Brand: R&G Pages: 3

Brand: yasuni Pages: 12

VIKING 3250D FGS

Brand: Lincoln Electric Pages: 56

Brand: MSD Ignition Pages: 16

Brand: Bosch Pages: 160

Brand: Shark Pages: 8

Brand: Memphis Shades Pages: 2

Brand: Razor Pages: 3

Brand: IBEX Pages: 3

Brand: Yamaha Pages: 27

Brand: Yamaha Pages: 26

Brand: Yamaha Pages: 44

Brand: Yamaha Pages: 36

Brand: Yamaha Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands