Yamaha Fazer FZ8-S Owner'S Manual Download

Page: 66 / 110

PERIODIC MAINTENANCE AND ADJUSTMENT

6-16

5. Pull the bottom of the fuel tank

cowling outward on both sides,
then remove the cowling by mov-
ing it forward, and then lifting it up.

6. Remove the fuel tank bolt on both

sides.

7. Lift the front of the fuel tank, and

carefully tilt it back and away from
the air filter case, but do not dis-
connect the fuel hoses.

WARNING! Make sure that the
fuel tank is well supported. Do
not tilt or pull the fuel tank too
much, otherwise the fuel hoses
may come loose, which could
cause fuel leakage and a fire
hazard.

[EWA10411]

8. Remove the air filter case cover by

removing the screws.

NOTICE:

When removing the air filter
case cover, be careful not to al-
low foreign objects to drop into
the air intake manifold.

[ECA12881]

1. Side cowling
2. Fuel tank cowling

3. Fuel tank cowling bolt

1. Fuel tank cowling

1. Fuel tank bolt

1. Air filter case
2. Fuel tank

1. Fuel tank hose

U42PE2E0.book Page 16 Thursday, December 6, 2012 8:54 AM

Summary of Contents for Fazer FZ8-S















































































































Search results

Summary of Contents for Fazer FZ8-S

Reviews:

Related manuals for Fazer FZ8-S

Brands by name

Popular brands

Yamaha Fazer FZ8-S, Owner'S Manual

Search results

Summary of Contents for Fazer FZ8-S

Reviews:

Related manuals for Fazer FZ8-S

Brands by name

Popular brands