manualshive.com logo in svg

Yamaha Electone F-15, Owner'S Manual

Share
Download
Yamaha Electone F-15 Owner'S Manual Download Page 40

Components

34

NOTICE

ECM00661

Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to se-
cure it in the tilt position.

EMU40762

Cowling lock lever

The cowling lock levers are used to secure
the top cowling.

 

EMU26464

Flushing device

This device is used to clean the cooling wa-

ter passages of the motor using a garden
hose and tap water.

 

TIP:

For details on usage, see page 71.

EMU26305

Alert indicator 

If the engine develops a condition which is
cause for alert, the indicator lights up. For
details on how to read the alert indicator, see
page 36.

1. Power tilt unit
2. Power tilt motor

1. Cowling lock lever

1

ZMU07818

1. Flushing device

1. Alert indicator

ZMU05597

1

ZMU05530

1

6AG-9-3D-1E0.book  34 ページ  ２０１５年１１月５日　木曜日　午前１１時７分

Summary of Contents for Electone F-15















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands