4-4
CARBURETOR
a
1
2
FLOAT HEIGHT INSPECTION
1. Measure:
9
Float height
Out of specification
→
Replace.
NOTE:
9
Lift up the float height so that the tip of the
float valve lightly contacts the float arm, and
then measure the float height
a
. (This mea-
surement should be made with the gasket
removed.)
9
Do not adjustable the float height.
2. Clean:
9
Carburetor body
Blow out all passages, jets, and carbu-
retor body with compressed air.
3. Inspect:
9
Valve seat
Wear/damage
→
Replace.
Dirt
→
Clean.
1
Wear at groove
2
Dirt
CARB
Float height:
16.0 mm (0.63 in)
7CF7E0-04 05.6.28 9:33 Page 4
