32
En
Setup Menu
Setting the digital output
The [DIGITAL AUDIO] options are:
[DIGITAL OUTPUT] and [LPCM OUTPUT].
1
In “AUDIO SETUP PAGE”, press
5
/
a
to
highlight [DIGITAL AUDIO], and then
press
3
.
2
Press
5
/
a
to highlight an option.
3
Press
3
.
DIGITAL OUTPUT
Set the digital output according to your
optional audio component connections.
OFF
Select this to turn off the digital output.
ALL
Select this if you have connected the digital
audio output jack to a multi-channel decoder/
receiver.
PCM ONLY
Select this only if your receiver is not capable
of decoding multi-channel audio signals.
y
• Even if “ALL” is selected, this unit converts
MPEG audio into 2 channel PCM and then
outputs to the connected component.
• When “PCM ONLY“ is selected, DTS digital
signal is muted.
LPCM OUTPUT
Select this if you have connected this unit to a
PCM-compatible receiver via a digital jack,
such as the coaxial jack. In this case, you may
need to adjust [LPCM OUTPUT].
Discs are recorded at a certain sampling rate.
The higher the sampling rate, the better the
sound quality.
48KHz
Select this to play back discs recorded at the
sampling rate of 48 kHz. All 96 kHz PCM data
streams (if available) are converted to the
sampling rate of 48 kHz.
96KHz
Select this to play back discs recorded at the
sampling rate of 96 kHz. If the 96 kHz disc is
copy protected, the digital output is
automatically converted to the sampling rate of
48 kHz. 48 kHz PCM data streams are output at
48 kHz.
4
Press
5
/
a
to select a setting, and then
press
ENTER
.
Turning the HDMI audio on/off
When you connect this unit to an HDMI
compatible component via the HDMI jack,
select to turn on or off the HDMI audio output.
•
Select [HDMI AUDIO] in “AUDIO
SETUP PAGE”.
ON
Select this to turn on the HDMI audio output.
OFF
Select this to turn off the HDMI audio output.
• If you are not using the HDMI audio output, set
this to [OFF].
• If the monitor/receiver connected to this unit
using HDMI does not support HDMI audio signal
input, set this to [OFF].
• When audio signals are being output by HDMI-
compatible components, digital signals output at
the coaxial jack of this unit are muted.
• When [DIGITAL OUTPUT] is set to [OFF] on
this unit, HDMI audio signal is not output even if
[HDMI AUDIO] is set to [ON] and an HDMI
connection is established between the monitor
and receiver.
• When [DIGITAL OUTPUT] is set to [ALL] on
this unit, PCM signals are still output if the
monitor and receiver only support the PCM
format. However, the HDMI audio signal is
muted when audio format plays back the DTS
source.
Notes
