
DVD-C996/DV-C6280
DVD-C996 DV-C6280
19
5. Disassembling the Optical
Pickup Unit
1. Remove the screw.
2. Release the tab, then remove spring holder 1.
Note
Be sure not to lose the spring.
3. Remove the guide shaft.
Note
Be sure to adjust the optical pickup tilt after replacing the
optical pickup.
(Refer to page 23, Optical Pickup Tilt Adjustment.)
4. Disassembling the Stepping
Motor Unit
1. Disconnect the flexible cable.
2. Remove the 2 screws.
Note
Take care when handling the flexible cable bacause it can be
broken by excessive force.
Motor FPC
Stepping motor
Connector
P.C.B.
Traverse chassis
Screw
Stepping motor unit
Flexible cable
Optical pickup unit
Tilt spring
Spring holder 1
Screw
Guide shaft
Tab
Traverse chassis
Optical pickup unit
Tilt spring
Spring holder 1
Screw
Guide shaft
Tab
Traverse chassis