DVD-C996/DV-C6280
DVD-C996 DV-C6280
11
■
SERVICE PRECAUTIONS
3.
Examples of Repairs Using Error Code
1.
Initializing the DVD Player
Initialize the DVD player whenever you replace a microprocessor, microprocessor peripheral parts, module P.C.B. or main P.C.B.
The customer settings will return to factory preset settings when the player is initialized. Make a note of the settings and reset
them after initializing.
• When resetting, see the Initial Setting in the Operating Instructions.
1-1. Precautions
The player will be initialized (return to the factory preset condition) when you press the “PAUSE”, “SKIP
T
” and “PLAYXCHANGE”
buttons simultaneously. When the DVD player is initialized, it also displays “INITIALIZED”.
1-2. Initialization Method
2.
Handling After Completing Repairs
Use the following procedure to secure the traverse unit in the standby position.
With the power turned on:
1. Press the “OPEN/CLOSE” button to close the tray.
2. Press the “POWER” button to turn off the power.
3. Disconnect the power plug from the outlet.
2-1. Method
Do not disconnect the power plug from the outlet with the tray still open, then close the tray manually. If you were to do so, the
traverse unit would not go to the upper (standby) position, and the player could not be transported.
2-2. Precautions
Refer to this section when carrying out repairs.
Error display
F0**
F103
F4FF
F500
F501
F502
F504
F505
F506
F600
F601
F602
F603
F610
F611
F612
F620
F621
F700
F701
F702
F880
F890
F891
F8A0
F893
F894
Malfunction example
Disc, IC7001
Disc, IC7001
IC351
Optical pickup, IC2001, IC5201, IC2511, IC2501
IC2001, IC6201
IC2501, IC2511, IC2001, IC5201
IC5201, IC2001
Disc, IC2501, IC2511, IC5201, IC2001
Disc, Optical pickup, IC2001
Disc, IC7001, IC5201, IC2001
Disc, IC7001
Disc, IC5201, IC2001
Disc, IC5201, IC2001
IC7001
IC7001, IC5201, IC2001
IC7001, IC5201, IC2001
Laser drive circuit
Laser drive circuit
IC6201
IC6201
IC6201
IC6201
IC6201
IC6201
IC6201
IC6302
IC6303
