Yamaha DTXT2S, Service Manual, Page: 42 / 95

DTXTREME IIS
42
C- 36. ROTARY ENCODER 1
C- 37. ROTARY ENCODER 2
C- 38. ROTARY ENCODER 3
C- 39. ROTARY ENCODER 4
C- 40. ROTARY ENCODER 5
C- 41. RIM SW IN 1
C- 42. RIM SW L IN 1
C- 43. RIM SW IN 2
C- 44. RIM SW L IN 2
C- 45. RIM SW IN 3
C- 46. RIM SW L IN 3
C- 47. RIM SW IN 4
C- 48. RIM SW L IN 4
C- 49. RIM SW IN 5
C- 50. RIM SW L IN 5
C- 51. RIM SW IN 6
[Initial indication]
[Test content]
Check that the rotary encoder rotates clockwise and
counter-clockwise correctly in order from the left
(EC701) to the right end (EC705). Connect the 3 zone pad (TP65S etc.) fitted with rim
switches to each input from IN1 (SNARE) to IN8 (H.HAT)
and check for correct operation.
[Test method]
Rotate the encoder clockwise and then counter-clockwise
according to the LCD indication.
Clockwise rotation
Counter-clockwise rotation
[Check item]
Check LCD test results.
[Indication of judgment result]
[Check item]
Check LCD test results.
In case of OK.
[Indication of judgment result]
In case of OK (Go next.)
In case of NG
[Content of FAIL judgment]
FAIL is displayed on the LCD as above and no further
process will occur even if the encoder is rotated in the
The above is displayed. Likewise, rotate the 2nd, 3rd,
4th, and 5th encoder in order.
direction indicated by the LCD.
[Completing the test]
OK: The test will proceed to the next one automatically.
[Content of FAIL judgment]
FAIL is displayed on the LCD as above and no further
36 ROTARY ENCODER 1
rotate left
37 ROTARY ENCODER 2
rotate right
37 ROTARY ENCODER 1
FAIL rotate right(left)
[Initial indication]
[Test content]
41 RIM SW IN 1
waiting
In case of NG
42 RIM SW L IN 1
waiting
41 RIM SW IN 1
FAIL
36 ROTARY ENCODER 1
rotate right
[Test method]
Connect the 3 zone pad fitted with rim switches to each
input jack in order from INPUT1 to 8 and press the rim
switch which is not on the 3 zone side. In case of OK, the
Press the switch on the 3 zone side. In case of OK, put in
IN2 (TOM1), press the switches which is not a 3 zone one,
and then press the 3 zone switch. Repeat this step in order
up to IN8 (H. HAT)
next display will appear.
42 RIM SW L IN 1
waiting
36 ROTARY ENCODER 1
C- 52. RIM SW L IN 6
C- 53. RIM SW IN 7
C- 54. RIM SW L IN 7
C- 55. RIM SW IN 8
C- 56. RIM SW L IN 8
C- 57. NOT AVAILABLE skip this step
* This test is not performed.
stepwill take place.
[Completing the test]
OK: The test will proceed to the next one automatically.
NG: For handling the FAIL judgment,
see "B. CARRYING ON THE TEST".