Yamaha DTXT2S, Service Manual, Page: 32 / 95

DTXTREME IIS
32
C-105.
C-106.
C-107.
C-108.
C-109.
C-110.
C-111.
C-112.
C-113.
C-114.
C-115.
C-116.
FACTORY SET
C-117. END
Test No. Title Judgment criteria, etc.
INDIVIDUAL OUT 3
INDIVIDUAL OUT 2
INDIVIDUAL OUT 5
INDIVIDUAL OUT 4
DIGITAL OUT
INDIVIDUAL OUT 6
AUX IN PEAK R
AUX INPUT
64ch OUT
Measurement
Measurement
Measurement of analog waveform through D/A.
Measurement
Measurement
Measurement
Input looped signals from PHONES.
Measurement
Auditory check
—
AUX IN PEAK L
AUX IN JACK SW
Input looped signals from PHONES.
ON/OFF of AUX IN JACK SW
[PLAY] key
[EXIT/NO] key
L R R L
R
0.1 uF
L
[DIAG 1] MIN MAX MIN_ATT MAX_ATT
43 59 76 100
[DIAG 1] MIN MAX MIN_ATT MAX_ATT
43 59 76 100
A. TEST ENTRY
While pressing the [PLAY] and [EXIT/ NO] keys, turn on the [STANDBY/ON] switch.
Measuring condition
1) Use PA-5C or PA-5D (adapter).
2) Measuring instrunments
Low-frequency oscillator, analog waveform measuring instrument, keyboard amplifier,
level meter
3) Jigs
MIDI cable, USB cable, PC with USB function, SmartMedia card, a set of Speakers, DI/O (D/A converter),
TP100 or TP120SD (PAD ENCODER inspection jig), pin cable, stereo cable, stereo cable (DC cut with Rch capacitor)
[Initial screen]
If any change is made, set each parameter to the following value through [DIAG 1] ~ [DIAG4].
Setting
Using [
▲
] or [
▼
], switch over screens through [DIAG 1] ~ [DIAG 4].
The following describes each parameter.
* Variable parameter
The parameters, which are set at the upper or lower limit in the range of 0 ~ 127,
are all included in the OK range.
[DIAG 1] LCD indication
Lower limit in the OK range in case ATT sw = ON at INPUT1~16.
Upper limit in the OK range in case ATT sw = ON at INPUT1~16.
Lower limit in the OK range in case ATT sw = OFF at INPUT1~16. MIN =43 (2b)
MAX =59 (3b)
MIN_ATT =76 (4c)
MAX_ATT =100 (64)
Upper limit in the OK range in case ATT sw = OFF at INPUT1~16.
Change each parameter by rotating the encoder under the numeral.