34
En
Optimizing the speaker setting for your listening room (YPAO)
10
Press
9
ENTER
to display the setup results
in detail.
11
Press
9
l
/
h
repeatedly to toggle between
the setup result displays.
Press
9
k
/
n
to toggle between the parameters in a
results.
y
If you are not satisfied with the results or want to manually
adjust each parameter, use “MANUAL SETUP” (see
page 63).
• The distances displayed in the “DISTANCE” results may
be longer than the actual distance depending on the
characteristics of your subwoofer.
• In the “EQ” results, different values may be set for the
same frequency to provide finer adjustments.
12
Press
9
ENTER
to return to the top
result display.
13
Make sure the pointer is pointing at “SET”
and “CANCEL” and then press
9
l
/
h
to
select “SET” or “CANCEL”.
Choices:
SET
, CANCEL
• Select “SET” to confirm the “AUTO SETUP”
results.
• Select “CANCEL” to cancel the “AUTO SETUP”
results.
14
Press
9
ENTER
to confirm your selection.
The following screen appears. Disconnect the
optimizer microphone from this unit to exit from
“SET MENU”. The optimizer microphone is
sensitive to heat. Keep it away from direct sunlight
and do not place it on top of this unit.
y
If you change speakers, speaker positions, or the layout of your
listening environment, run “AUTO SETUP” again to recalibrate
your system.
AUTOSETUP
.
RESULT
SP
:
3/4/0.1
DIST:
4.50/5.30m
LVL : -9.0/+6.5dB
SET
CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Detail
>
RESULT
WIRING
FRONT L
;;;;;;;
OK
[ ]/[ ]:Select
[ENTER]:Return
[
[
Results of the speaker
connection and wiring
(WIRING)
Results of the speaker distance
from the listening position
(DISTANCE)
Results of the setting of each
speaker size
(SIZE)
Results of the parametric
equalizer of each speaker
(EQ)
Results of the speaker output level
(LEVEL)
Notes
AUTOSETUP
RESULT
SP
:
3/4/0.1
DIST:
4.50/5.30m
LVL : -9.0/+6.5dB
.
SET
CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
>
AUTOSETUP
RESULT
SP
:
3/4/0.1
DIST:
4.50/5.30m
LVL : -9.0/+6.5dB
.
SET
CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
>
AUTOSETUP
[MENU]:Exit
AUTOSETUPComplete
Disconnect Microphone
PRESS [ENTER]
