Yamaha disklavier Mark III Series, User Manual

Page: 13 / 83

1
English Chapter 1: Setting Up Y
our Disklavier
This chapter provides information on the supplied items and how to set up your Disklavier.
Items Supplied with
the Disklavier
Check that the following items are supplied with
your Disklavier:
• 1 Remote Control
• 2 Batteries for the Remote Control
• 2 Disklavier Sample PianoSoft Disks
• 1 Blank 3.5" 2HD Floppy Disk
• 1 Sample PianoSoft.PlusAudio TM CD Software
• Basic Operation Manual & Advanced
Operation Manual
• 1 Control Unit Suspension Bracket
• 1 Stereo Headphones
Connecting the Control
Unit
Make sure that the control cable extending from
the piano is firmly connected to the TO
CONTROL CABLE FOR PIANO connector on
the rear panel of the Control Unit.
Also make sure that the CD control cable
extending from the piano is connected to the CD
CONTROL connector on the rear panel of the
Control Unit.
Note:
The control cable should be connected to the
Control Unit when the Disklavier is installed.
If, however, it is not, carefully connect the
control cable to the Control Unit’s TO
CONTROL CABLE FOR PIANO connector
on the rear panel. See step (4) in “Mounting
the Control Unit to the Grand Piano” at the
beginning of this manual.
It is recommended to mount the Control Unit to
the underside of the treble side key bed. See
“Mounting the Control Unit to the Grand Piano”
at the beginning of this manual.
Chapter 1
Setting Up Your Disklavier
MID
I
OU
T
IN
TO
C
ON
TR
OL
C
AB
LE
FO
R
PI
AN
O
HOST SELECT
TO HOST
MID
I PC
1
PC
2
MA
C
CD
C
ON
TR
OL
AU
DIO
/A
NA
LO
G
M
ID
I I
N
R
L
Control cable
CD control cable