ii
Read the following before operating the Disklavier.
■
Warnings
•
Do not locate the Disklavier in a place subject to
excessive heat, low temperatures, or direct
sunlight. This could be a fire hazard and may
damage the finish and internal parts.
•
Excessive humidity or dust can lead to fire or
electric shock.
•
Connect the plug on the Disklavier power cable
to a compatible AC outlet. Failure to do so will
present a fire and electric shock hazard. If the
power cable plug is not compatible with your AC
outlet, consult your dealer.
•
Do not plug several devices into the same AC
outlet. This can overload the AC outlet, and lead
to a fire and electric shock hazard. It may also
affect the performance of some devices.
•
Do not place heavy objects on the power cable. A
damaged power cable is a potential fire and
electric shock hazard. If the power cable runs
under a carpet, make sure heavy objects, including
the Disklavier, are not placed on top of the cable.
•
If the power cable is damaged (i.e. cut or a bare
wire is exposed), ask your dealer for a
replacement. Using the Disklavier in this
condition is a fire and shock hazard.
•
When disconnecting the power cable from an
AC outlet, always pull from the plug. Never pull
the cable. Damaging the cable in this way is a
potential fire and electric shock hazard.
•
The cover of the unit should be removed only by
qualified service technicians.
•
Do not place liquid containers such as vases,
potted plants, glasses, cosmetic bottles,
medicines, etc., on top of the Disklavier.
•
Do not try to modify the Disklavier, as this could
lead to a fire or electric shock hazard.
•
When moving the Disklavier to another location,
turn off the power, remove the power plug from
the AC outlet, and remove all cables connected
to external devices.
■
Cautions
•
Turn off all audio devices when connecting to
the Disklavier. Refer to the user’s guide for each
device. Use the correct cables and connect as
specified.
•
Set the volume level on all the devices to
minimum before applying power.
•
Do not play the Disklavier at a high volume for
extended periods; you may damage your
hearing. This is especially important when using
headphones. If you think your hearing ability is
impaired, consult your doctor.
•
If the Disklavier is overexposed to high amounts
of stress — caused by the prolonged playback of
extreme concentrations of data — the Disklavier’s
thermal relay may trip. The thermal relay will
automatically reset when the Disklavier has
cooled down.
•
If you notice any abnormality — such as smoke,
odor, or noise — turn off the Disklavier
immediately, and remove the power plug from
the AC outlet. Consult your dealer for repair.
•
If a foreign object or water gets inside the
Disklavier turn it off immediately, and remove the
power plug from the AC outlet. Consult your dealer.
•
If you plan not to use the Disklavier for a long
period of time (such as when you are on
vacation), disconnect the instrument from the
power outlets.
•
Always remove the power plug from the AC
outlet before cleaning the Disklavier. Leaving the
power plug connected presents a risk of electric
shock.
•
Do not use benzene, thinner, cleaning
detergent, or a chemical cloth to clean the
Disklavier.
•
Do not place metal objects with rubber feet on
top of the Disklavier. The color and finish of the
Disklavier can be damaged.
•
Do not place heavy objects on the Disklavier.
Doing so can damage the Disklavier.
•
Use a soft, dry cloth to clean the Disklavier.
However, if you discover a stain, carefully use a
soft damp cloth to remove it.
■
Interference
•
The Disklavier uses high-frequency digital
circuits that may cause interference to radios
and TVs placed close to it. If interference does
occur, relocate the affected equipment.
Please keep this manual for future reference.
Important Precautions
Summary of Contents for DISKLAVIER ENSPIRE ST/PRO
Page 7: ...English ST PRO Owner s manual ...
Page 39: ...Appendix ST PRO Appendix ...
