Introduction
1
Chapter
3
AUTO PLAY switch
Activates or deactivates the auto play function. You
can make settings for the auto play function using
the ENSPIRE Controller app.
AUTO OFF MODE switch
Activates or deactivates the auto power-off
function. Set this switch to ON to turn the power off
automatically if you do not use the Disklavier for the
time specified with the ENSPIRE Controller app.
Note:
When set to ON, the Disklavier automatically turns off under the
following conditions:
• No operation is performed on the switch box.
• No operation is performed on the ENSPIRE Controller app.
• The keyboard is not being played.
• The Disklavier does not receive the MIDI data.
MAINTENANCE button
For service personnel only. Do not touch this
button.
USB port
Used to connect the USB wireless LAN adaptor
(UD-WL01).
Note:
The unit cannot detect the USB flash memory if two or more
memories are connected at the same time.
WLAN switch
Sets the method for wireless LAN connection when
connecting the USB wireless LAN adaptor to the
USB port. See “Connecting the Disklavier and
Smart Device to a Network” on page 12.
■
Switch Box (Rear Panel)
1
3
4
5
2
1
2
3
4
5
Summary of Contents for DISKLAVIER ENSPIRE ST/PRO
Page 7: ...English ST PRO Owner s manual ...
Page 39: ...Appendix ST PRO Appendix ...
