Yamaha Disklavier ENSPIRE DKC-900, Owner'S Manual

Page: 24 / 60

Getting Started
2
Chapter
18
Note:
By connecting this product and smart device to a network, you can enjoy a
variety of features through the Internet Direct Connection (IDC) services or
control this product using your smart device (ENSPIRE Controller app).
To fully control this product with the ENSPIRE Controller app, you must
connect this product and smart device.
Here is the summary for connection:

Preparations
• To use the Internet connection, you will first need to subscribe to an
Internet service or provider.
• Use a computer to obtain and configure Internet service. You cannot
obtain Internet service or configure router settings on a local area network
using this product itself.
Connecting the Product and Smart Device to a Network
• This product attempts to achieve a
balance between security and
usability in its network
implementation. However, a
determined hacker may be able to
defeat these security measures and
utilize the network of the
purchaser in an unauthorized
manner. Since each network is
different, only the purchaser can
determine whether the security
measures discussed here will
adequately protect their network.
• The purchaser acknowledges that
connection to the Internet and use
of this product Internet features is
done at the risk of the purchaser. In
no event shall Yamaha, its
subsidiaries or Yamaha’s and/or
its subsidiaries’ directors, officers,
or employees be responsible for
unauthorized access, loss or
alteration of the data of the
purchaser or be liable for any
damage from intrusions.
Internet Direct Connection (IDC)
Internet Direct Connection (IDC) is a feature that allows you to connect
this product directly to the Internet. IDC users are able to listen to a
streaming broadcast (DisklavierRadio), and receive valuable information
such as product updates. This product can be upgraded remotely as new
technologies and services are developed through the IDC service.
Install the ENSPIRE Controller app to your smart device
(page 25).
3
Search for this product using the ENSPIRE Controller app
and connect to it (page 25).
4
Choose the connection method (page 19).
1
Connect this product and smart device to a network
(page 21 to 24).
2